Street Dreams Detail - Ferrari 599 GTO Rosso Corsa Correction

Discussion in 'Professional Detailer's Studio' started by dsms, Jan 23, 2012.

  1. dsms

    dsms DB Forum Supporter

    Ferrari 599 GTO in need of extensive paint correction. No need to post any technical information about this car, its a GTO, and yes its wonderful.


    Most of the usual Ferrari refinishing problems:

    -Sanding scratches
    -Rids
    -Rotary Holograms
    -Heavy Swirling
    ... and overspray, lots of overspray!


    Very pretty...

    [​IMG]

    Very swirly...

    [​IMG]

    Wheels soaked with Brake Buster, very mild wheel cleaner with no iron removing properties. My choice for cars with carbon ceramic brakes. Tires and wheel wells scrubbed clean. Stiff bristle brush is ideal for removing most of the old tire dressing.

    [​IMG]

    [​IMG]

    Started with a prep wash, rinsed down and foamed followed by a 2 bucket wash using a mixture of citrus soap and some Lusso auto bathe. The finish was then clayed to remove some of the overspray...

    [​IMG]

    [​IMG]

    After claying the car was nearly stripped of all old protection, 2 IPA wipedowns ensured a 100% clean finish ready for paint correction.

    Here is the prepped finish out in sunlight, some heavy overspray on the passenger side

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Back inside I measured the paint with a paint thickness gauge. Very healthy readings always good to see before beginning a lengthy paint correction.

    [​IMG]

    Mesh grilles/vents taped off. Getting polish splatter or dust in there will take forever to get out!

    [​IMG]

    Better idea of what the overspray on the passenger door looked like, clear line shows wherever the car had tape on it from delivery

    [​IMG]

    Some closeups of the finish under LED light (640lumens worth)

    [​IMG]

    [​IMG]

    [​IMG]

    I started with the worst area first, started with foam and upgraded to a 3" wool pad on the rotary to cut out the heavy defects followed by foam compounding and then foam finishing using both Meguiars and Menzerna

    Before...

    [​IMG]

    [​IMG]


    After... its that simple!

    [​IMG]

    Okay well not really, rear plate area under the LED, much smaller defects show up...

    [​IMG]

    After compounding and polishing

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Lip polished as well, delicately and with a 3" pad... natural 50/50 "erasure" style

    [​IMG]

    Working my way around the rest of the bumper

    [​IMG]

    [​IMG]

    Light cutting with the MF disc on speed 5

    [​IMG]

    50/50 overspray

    [​IMG]

    Before

    [​IMG]

    After compounding w/ Surbuf, the mess it leaves is worth it and the haze it leaves behind is only superficial, I later followed up with foam

    [​IMG]

    More clusters on the drivers side, heavy holograms and RIDS

    [​IMG]

    Removed

    [​IMG]

    50/50

    [​IMG]

    Pulled the GTO out to check my work in the sun

    [​IMG]

    Clear sunbursts indicate a properly leveled paint finish, still 1 more final polishing stage to go

    [​IMG]

    [​IMG]

    Light cutting on the door

    [​IMG]

    [​IMG]

    [​IMG]

    After all correction was completed a light dust down with the detailersdomain duster was followed by a few IPA wipedowns to prep for LSP.
    LSP of choice was Wolf's Body wrap applied to both the paint and clear film

    First the matte on the roof needed some attention. Pre cleaned using Swissvax Opaque pre cleaner and then topped with Swissvax Opaque wax, 2 layers

    [​IMG]

    [​IMG]

    All trim and seals were treated using Wolfs Trim Guard. Trim pre cleaned using some IPA on a MF pad

    [​IMG]

    [​IMG]

    [​IMG]

    Tires degreased again before applying dressing, left side still showing old tire dressing and dirt, right side stripped of everything

    [​IMG]

    Engine bay cleaned and detailed. Mammoth of a V12 sounds something like a symphony of angry lions, its quite something

    [​IMG]

    [​IMG]

    [​IMG]

    Cleaned of polishing dust and fuel bib wiped down with 303 protectant

    [​IMG]

    [​IMG]

    Exhaust tips polished out

    [​IMG]

    [​IMG]

    Final photos...

    [​IMG]

    [​IMG]

    Wheels sealed with Nanolex alloy sealant

    [​IMG]

    [​IMG]

    [​IMG]

    The following morning outside

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]


    This one is from later in the week, GTO and 4.0 together :thumb:

    [​IMG]


    Thanks for reading!

    All the best,

    Dave
    Street Dreams Detail
     
  2. detailersdomain

    detailersdomain Administrator

    nice work :thumb:
     
  3. Chaseme

    Chaseme DB Forum Supporter

    Killer job Dave. You are a privileged few to detail such a car.
     
  4. mrd0t

    mrd0t Obsessive Detailer

    That client has it all! Great work!
     
  5. bryansbestwax

    bryansbestwax DB Forum Supporter

    lookin good there dave.
     
  6. Kaban

    Kaban Welcome to Detailing

    Great work as usual man. I can't believe Ferrari delivers cars in such poor condition to customers...
     
  7. kakeuter

    kakeuter DB Forum Supporter

    Looks great Dave, that one had it's fair share of defects.

    -Kody-
     
  8. rwisejr

    rwisejr DB Forum Supporter

    Love yor details Dave. Another stunner !!!
     
  9. Jumbo Jet

    Jumbo Jet Jedi Nuba

    Looks amazing. Great work!
     
  10. GoFast908Z

    GoFast908Z DB Pro Supporter

    As Bob likes to say................"Shutdown Status!!!"

    Another epic writeup with epic documentation on an epic car.....Dave this is just impeccable work. Congratulations Dave, you deserve it.
     
  11. Auto Concierge

    Auto Concierge DB Pro Supporter

    What did that take .....like 4 hours or something?............ "mehness".
     
  12. dsms

    dsms DB Forum Supporter

    4.5 actually... remember I did a FULL 1 step :doh:
     
  13. nyrep1

    nyrep1 Obsessive Detailer

    enzo would be proud
     
  14. m3jasper

    m3jasper Any Rag Vehicle Washer

    It's amazing to see how that car was delivered. Amazing work to bring it to its current state!

    Have you had a chance to get your hands on the McLaren yet? I'm curious to see how McLaren delivers the car compared to the other manufacturers...
     
  15. mpanella

    mpanella DB Forum Supporter

    Dave

    When will the hats be available to the public?
     
  16. dsms

    dsms DB Forum Supporter

    I made one for you Mike, its 4XL just like you wanted!
     
  17. Auto Concierge

    Auto Concierge DB Pro Supporter


    Oh no....................now Dave's mind will be turning to thoughts of "Jwear" with the logo as follows.............. :shh:
     
  18. bryansbestwax

    bryansbestwax DB Forum Supporter

    You should make some with Bobisms. "cleaness cerrtified" Tightness achieved", No Helen Keller waxing"
     
  19. drew935

    drew935 Auto Salon Works

    /\/\ you guys are funny!
    Wow Dave good cleanup. GT-Ooooso clean :)
     
  20. Upper Class Detailing

    Upper Class Detailing DB Pro Supporter

    amazing work Dave!!! as usual.
     

Share This Page