This detail is a 2011 Audi A4 in black, low miles ~10k and never scene an ounce of wax since purchased, Sorry Dave! We only had roughly 6hrs total to execute an exterior correction and after a 12man hours the outcome is a 8.5/10, We only had time for a wash, clay, single pass, seal and wax, so there is certainly some defects left on the table given more time we would have chased out. BUT, the outcome was steller for a single pass on this ultra hard Audi paint! As we were pressed for time we only got a few shots before and after but enough to give everyone the idea regarding the paints defects and results from correction. Enough of that on to the detail, Oh and I hope you enjoy!!! Materials: CG Maxi Suds II Westley’s Bleach White Sonax Full Effect Wheel Cleaner Mother’s Clay Bar Kit ONR Clay Bar Dilution IPA wipe down Dilution Menzerna S34A Menzerna 106FA Prima Amigo Menzerna Powerlock Autoglym HD Stoner’s Invisible Glass Prima Hydro Prima Slick CG Xtreme Shine CG Bare Bones No. 7 Chrome Polish Uber 5.5” Orange Uber 5.5” Blue Uber 5.5” Black Swissvax Wheel Brush Uber Boar’s head brush Uber Wheel Brush Misc MF Towels Q-tips 3M Painters Tape Process Exterior: APC lower panels, CG Maxi Sud II Foaming with Micro Fiber Mitt, dried, taped, claybar, S34A w/orange on the DEEP stuff (hood and fender scuff), 106FA w/ Orange (1 passes), IPA wipe down, Prima Amigo w/ Blue (1 pass, really made it POP!),Powerlock w/ Black (45min set-up), Autoglym HD, Prima Slick wipe down to cut the static. Wheels: Sonax Full Effect, Westly’s Bleach White, Wheel Brushes, dried, ONR wipe down, clay bar, Prima Hydro, tires dressed with CG Xtreme Shine Engine Compartment: Adam’s APC, misc brushes, CG citrus wash by hand, rinse, dried, dressed with Xtreme Shine On to the pics... All taped and ready for the correction... Couple of pics of the nasties hiding in the paint... Scuff Damage on driver's front (before) Scuff damage (after) 50/50s Pillars (before) Pillars (after) Finals...
Thanks for the compliments guys. We used PC 7424XPs on the detail. We talked about pulling out the Flex 3401 but opted not to for some reason.
