dsms detail - White Bentley GT Correction

Discussion in 'Professional Detailer's Studio' started by dsms, Dec 7, 2009.

  1. dsms

    dsms DB Forum Supporter

    2005 Bentley GT: Daily driver

    Booked for 2 day full paint correction + winter protection

    [​IMG]

    [​IMG]

    [​IMG]

    Started off with the wheels and tires. P21s gel, S&R on the inner barrels

    Before

    [​IMG]

    [​IMG]

    After

    [​IMG]

    The car hadnt been washed in a few weeks and was fairly dirty, in this situation I much prefer to do a nice sudsy wash but with the freezing weather and snow in the forecast I opted to use ONR instead. I must say I am more impressed with ONR each time I use it, especially for situations such as this.

    After a quick pass using ONR, I rinsed my mitt every panel

    [​IMG]

    [​IMG]

    Dried the car off best I could outside but the rain came so I pulled it in the garage to finish drying and the rest of the prep work

    Blow dried the grill, wheels and jambs

    [​IMG]

    Cleaned up the doorjambs with APC 20:1 and then sealed them with Optiseal, havent used this product before and I figured this would be a good place to test it out.

    [​IMG]

    Finished

    [​IMG]

    [​IMG]

    While I was back there I finished the rest of the trunk area

    [​IMG]

    And then the snow came, first snow this year :applause:

    [​IMG]

    Moved to claying, used a medium aggressive bar for most of the car, lower panels needed meguiars red aggressive bar for some stubborn grime

    [​IMG]

    [​IMG]

    Bentley had a hard clear, defects werent too bad but I wanted to get as close to 100% as possible. 2 step process used, varied between the DA and rotary. Some areas needed 2 or 3 hits to get full correction.

    Before I began I took some paint readings

    [​IMG]

    During correction

    [​IMG]

    Driver door 50/50

    [​IMG]

    Trunk

    [​IMG]

    [​IMG]

    Rear spoiler before

    [​IMG]

    During

    [​IMG]

    After

    [​IMG]

    Taillight under LED

    [​IMG]

    [​IMG]

    Finished

    [​IMG]

    The paint being white I had some trouble capturing good 50/50 shots, I found a video with my old point and shoot did a little better job of showing the finish before and after

    #1

    [​IMG]

    After correction was complete I gave the car a thorough IPA wipedown to prep for LSP

    Moved onto the trim work, been dreading the front grill since I started but what can ya do:shrug: Took a quick break outside, pardon the snow on my hair and shirt :doh:

    [​IMG]

    Before

    [​IMG]

    After

    [​IMG]

    Finished, in total this took me around 45minutes of hand polishing and then sealing with optiseal. Very lucky the grille did not have any hard water etching!

    [​IMG]

    Applying LSP by machine speed 5 (notice all the black magic or whatever car care stuff in the background, not my gear... owners stuff... got him set up with some quality QD, wheel gel and drying waffle weaves before I left, I dont want the bentley going to sh!t within a month :thumb:)

    [​IMG]

    [​IMG]

    Tires treated with SV Pneu, at first I didnt think this was such a great product, or at leatse any better than what I have used before but now I see why it demands the price, it just works! Deep black look, minimal shine and easy application. New go to tire dressing.

    Once the tires were dressed I went in and sealed them up using JetSeal

    [​IMG]

    [​IMG]

    Exterior window trim dressed as well, one flat strip made for easy work

    [​IMG]

    dressed up the wheel wells and de-tarred surrounding trim using an MF pad

    before

    [​IMG]

    [​IMG]

    Interior before, this car gets driven primarily as DD.

    [​IMG]

    [​IMG]

    Conditioning the leather for a matte finish

    [​IMG]

    Rosewood cleaned and sealed with BF spray sealant

    [​IMG]

    Interior finished. Door seals treated and jambs sealed after.

    [​IMG]

    [​IMG]

    Exhaust finished, fine grad steel wool, than just a MF towel

    [​IMG]

    Exterior finished

    [​IMG]

    [​IMG]

    [​IMG]

    Despite me not wanting to pull the car out with some snow still on the ground, I felt I would get some flack for not posting sun pics when there was sun present so here you go...

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    (snow on the branches are the blobs you see in the reflection)

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Thanks for looking :thumb:
     
  2. billy

    billy Obsessive Detailer

    As usual another great work:thumb:
     
  3. kustomizingkid

    kustomizingkid Nuba Guru

    Looks great as usual!!!
     
  4. billyblooshoes

    billyblooshoes DB Forum Supporter

    Really nice work dave. Maybe I missed it but what was your lsp?

    Lol @ the fiero.
     
  5. willjco

    willjco DB Forum Supporter

    Great work Dave...wish i had you clients
     
  6. GDAL

    GDAL Guest

    Great work as usual Dave ... :applause:


    45 min on the grill? I don't have the patience to deal with a grill like that ...:worship2:

    Are you working on the black fiero next?
     
  7. CYANiDE

    CYANiDE Virgin Detailer

    Lookin' good. Should have asked to pull out the Ferrari for a spin =]
     
  8. P1et

    P1et Official DB Moderator

    Nice work, and a lovely stable of vehicles.

    The owner really likes the number 69 doesn't he?
     
  9. Hostage1978

    Hostage1978 Guest

    gotta respect the time and effort put into that grill, nice result.
     
  10. GDAL

    GDAL Guest

    LOL ... I need to start paying more attention!
     
  11. Chas

    Chas DB Forum Supporter

    Looks awesome Dave the car looks great in white, such a classy look. Your work really took it to its best.
     
  12. agpatel

    agpatel OD On Detailing

    Great job on the Bentley! I hate honeycomb grill like the GT has, it takes so much time to properly clean and dress...all around great job! Nice to see that you set up the owner with the right tools to keep it looking good properly.
     
  13. slanguage

    slanguage OD On Detailing

    nice work as always. love the Fiero in the background.
     
  14. trhland

    trhland Nuba Guru

    great job dave!!
     
  15. detailersdomain

    detailersdomain Administrator

    great job this is the one you were telling me about...
     
  16. Nica

    Nica Banned

    hmmmmm...Bentley :druling: :druling:

    Very classy vehicle :worship2:

    Vehicle turned out great, well done...but man that is a wicked, wicked garage :woo:

    Thanks for sharing the pics.
     
  17. Jedidiah

    Jedidiah Guest

    so who takes these shots?

    great work as usual . also what product for the tails?
     
  18. TONY MONTANA

    TONY MONTANA DB Forum Supporter

    great job i love looking at correction work on white paint im also glad to see your listing the products used again (hope everything worked out with that situation)
     
  19. d00t

    d00t Welcome to Detailing

    Looks amazing dave, great work.

    How are you capturing the swirls with your DSLR? Full manual?
     
  20. supercharged

    supercharged DB Forum Supporter

    stunning work, Dave!
     

Share This Page