Detailer's Domain: White S2000/ Swissvax Glacier

Believe it or not this was the first S2000 I have ever done, not a bad car.
I got this car from an S2KI.com member. Great guy always pushes for me on the board.

I guess I didn't really know what I was in for, the car just got back from the body shop and as we all know this car had over spray, rail dust, just about everything from sitting at the body shop for awhile. The interior was pretty dusty and unkept (I believe this was the body shop not the owner)

So here was the plan.. Wash, Clay, Menzerna PO203 with an Uber Orange/Green Pad (Makita/Metabo) and to finish Menzerna PO85RD with an Uber Blue Pad.

The wax well I finally got to try out Swissvax Glacier (and I like it, I'm going to try it out on a silver car next)

The interior, well the usual, Leather Master Strong Cleaner followed by Leather Master Vital.
Dash and plastics cleaned and treated with Einszett Cockpit.

Windows were cleaned with Lusso Glass Polish and an Uber Glass Towel.

As for the engine we used Adam's All Purpose (a nice inexpensive degreaser) and a Swissvax Wheel Brush. Einszett Vinyl Rubber Care for the rubber and Black Wow for the plastics.

Products Used:
Exterior:
Lusso Auto Bath in the Cam Spray Foam Canon
Swissvax Paint Rubber and Optimum Instant Detail Spray and Gloss Enhancer for clay lube
The Uber Menzerna PO203S/PO85RD Kit
Menzerna Top Inspection
Swissvax Glacier

Wheels and Tires
Uber Wheel/Tire/Wheel Well Kit
Replaced Swissvax Pneu on this one for Einszett Vinyl Rubber Care

Interior and Glass
Lusso Glass Polish
Leather Master Strong Cleaner
Leather Master Vital
Einszett Cockpit
Einszett Plastic/Vinyl Cleaner

Engine:
Adam's All Purpose Cleaner
Black Wow (on covers and plastics)
Einszett Vinyl and Rubber Care (rubber etc)

Tools:
Infratech 5300
Brinkmann MaxFire
Metabo PE12-175
Makita 9227 Hi Speed Rotary
The Uber Foam Pads (5.5inch)
Tons of "Uber" Microfiber Towels
Uber Drying Towels
Cam Spray 1500A with Cam Spray Foam Gun


Here are the pictures and more descriptions:

Before:
Door jambs are extremely dirty


Trunk jambs filthy


Dirty Cowl


By the time I started on the car I wasn't able to get the rail dust on the car and good before shots but you get the picture with the shots above, the rest of the car was just as bad.

We started with the engine first:

Engine before shots:





Engine with Adam's All Purpose dwelling:


Cam Spray Pressure Washer with Cam Spray Foam Canon with Lusso Auto Bathe, worked awesome and smelled great!



Uber Boar's Hair Wash Brush in action:


After the rinse we dried the car with an Uber Jumbo Waffle Weave Towel


The car was clayed with a Swissvax Clay Bar and Optimum Instant Detail Spray (the Swissvax Mixing bottle insures proper measurement and the nozzle is very efficient)


Believe it or not there was rail dust/small rust specks even in the door sills


Trunk:

Top Inspection was used to clean them up a bit.


Before:


After of a small section of the trunk jamb


Door jamb before:


After:


Einszett Plastic/Vinyl Cleaner with Swissvax Brush used to clean the cowl




Breaking out a new Metabo for the shop and for customers to demo


Metabo in action:


Raggtopp was used to clean and protect the vinyl top


Einszett Vinyl Rubber Care in the rubber parts of the engine


Engine After:


After the wheels were dried we clayed the contaminants off them (tons of it)

Products used Uber Wheel/Wheel Well/Tire Kit (with Einszett Vinyl Rubber Care)

Before


Claying:


Take a look at the wheel after the contaminants were removed


Swissvax Autobahn removal


Final shot


As you know its hard to take shots of defects on white but here goes:

Before:


After:



Interior:
This should tell you the story of the interior in 1 shot:

or 2


Dusting:


Wiping:


Cleaning windows:


Vac


Afters:




Swissvax Glacier


Final shots of the car:











Enjoy!

 

wow swissvax glacier looks great on the white, makes me tempted to try it, but I can't afford a $160 wax yet. Great detail!

 

so did you skip the CF?

 

yup don't need it if I just did a full paint correction job.

I typically use cleaner fluid now on new cars that don't need work, or well maintained cars.

 

Great job Phil, the white has a great shine to it.

 

nice Phil!

 

Looks good! Does it have a turbo kit installed?

 

I want to say yes but I'm not 100% sure.

 

Looks much better Phil, great job!

 

kick ass job on the car, attention to detail is awesome!!

 

do those swissvax mixing bottles now come with those new nozzles?

 

Super nice job!!! How do you like glacier?

 

Nice work Phil! Congrats on the shop being completed!

 

Very tidy looking number!

 

Awesome piece of work. Glacier looks good, thanks for sharing!

 

Great job on that car, Phil...man I thought chrome wheels showed a lot, white painted wheels are brutal!! Just a thought...have you ever tried the AutoInt ABC Decontamination kit on a white or solid colour car? Especially those wheels, it might have really helped. I'm going to be using my kit more this summer. I really like how the jams and interior cleaned up..great work there!!

 

Awesome job Phil

 

i have to say i love when you reply to posts.richy. the nice warm blue type is nice and soothing on my eyeballs:thumb:

 

looks good phil. the glacier makes that white really pop.

 

Nice work, Phil! I like how that white came out. LSP looks promising too.