Car Covers Recommended Products In the interest of full disclosure, I am in no way affiliated with, employed by, have any vested interest, or in any way receive compensation from the sale or distribution of the product lines reviewed or the company that manufactures or markets it. Results Obtained These articles are not intended to warrant or guarantee any results with any of the products mentioned. No endorsement of companies or their products mentioned is intended, nor is criticism implied of similar companies or their products not mentioned. The author does not provide, nor guarantee and is not responsible or liable for any third-party products or services. Brand, product and company names used throughout these articles are trademarks of their respective companies and are used for product identification purposes only. Proper Technique A sound understanding of the proper technique and the correct process will produce excellent results even with a mediocre product. A quality product used without the proper surface preparation or application technique will never obtain a satisfactory result. Using the proper methodology (surface preparation, using a quality product, along with the correct application technique) will ensure an excellent result. Skill Level / Experience Some methods described may be beyond the capabilities of the average detailer or enthusiast; in this case we strongly encourage the reader to consult a professional detailer or body shop concerning the matters discussed herein. Liability The writer assumes no responsibility, expressed or implied, due to misuse or misinterpretation of the information or methods used, or for any vehicle damage or injury that may occur due to the suggestions and information offered. Product Quality and Technique Proceed with this in mind; the products you use constitute a very small factor in the equation. Methodology and technique constitute 95%; the reasoning behind the choice of quality products is to eliminate any limiting factors, thus enabling you to place emphasis on technique used. There is no `one correct way' to apply a product; the way detailing products are customized are what each individual finds give them their desired results. Aesthetics The aesthetics- of a vehicles appearance is very subjective to say the least, the only best wax or sealant that really matters is what looks 'best' to you. In the final analysis it all come down to; 85% preparation, 5% product, 7% application methodology and the balance is in the ‘guy’ of the beholder Research Research others opinions and products, test them and then make an objective decision based upon factual information not marketing hype or brand loyalty. I have always thought that the more facts and information you have at hand the easier it is to judge what information you are being given. After all, how can you fully understand and properly use any product unless you have all the facts? Detailing products Should work on their real merits, not ‘smoke and mirrors'. Most importantly - choose carefully whose advice you listen to, and more importantly what advice you act upon, so I would strongly suggest that you verify any information that I or anyone else shares with you. Car Cover Products Protect your investment with a car cover, outdoors, car covers offer unequalled protection against ultraviolet radiation (UVR) they are manufactured to be water-resistant and are available in various breathable fabric materials that provide protection from acid rain, pollution, bird excrement, tree sap and wind blown debris, as well as protection against every type of climatic conditions, can be used for both long-term indoor or outdoor vehicle storage. Covercraft Products are well known in the automotive industry as the largest manufacturer of custom patterned car covers in the world. Started in 1965 as a two-person company, now with over 500-employee’s supplying the automotive after market, original equipment manufacturers (OEM) and speciality markets with over 45,000 custom cover patterns, made in the USA with the QS 9000 standards rating award, meeting strict international quality standards. They offer a four year replacement warranty. Websites- http:// www.carcoverworld.com/ Europe- http//:www.covercraft-europe.com For relative ease of handling choose a cover with a fabric weight of between 4-7 oz per sq. yd. Used for long-term vehicle storage, either in the garage or outdoors, car covers protect against accidental scratches and dings from passers-by, car doors, lawn mowers, sporting equipment, bikes and pets. Covercraft Products are well known in the automotive industry as the largest manufacturer of custom patterned car covers in the world. Started in 1965 as a two-person company, now with over 500-employee’s supplying the automotive after market, original equipment manufacturers (OEM) and specialty markets with over 45,000 custom cover patterns. Made in the USA with the QS 9000 standards rating award, meeting strict international quality standards Some fabrics offer more heat insulation than others, simply because they are multi-layered and are more effective at keeping heat away from the vehicle surface, but any cover will help reduce the vehicle temperature on a hot day. They are manufactured to be water-resistant, available in various breathable fabric materials for protection against every type of climatic conditions, as well as both long-term indoor or outdoor vehicle storage Car Cover Product Selection: Covercraft Products are well known in the automotive industry as the largest manufacturer of custom patterned car covers in the world. Started in 1965 as a two-person company, now with over 500-employee’s supplying the automotive after market, original equipment manufacturers (OEM) and specialty markets with over 45,000 custom cover patterns. Made in the USA with the QS 9000 standards rating award, meeting strict international quality standards- Car Covers - Covercraft & Coverking Car Covers - Truck & SUV Accessories Some fabrics offer more heat insulation than others, simply because they are multi-layered and are more effective at keeping heat away from the vehicle surface, but any cover will help reduce the vehicle temperature on a hot day. They are manufactured to be water-resistant, available in various breathable fabric materials for protection against every type of climatic conditions, as well as both long-term indoor or outdoor vehicle storage 1. Vehicle Storage a) Indoor: Dustop TM- 4 layer cover with maximum dust protection, and its soft inner layer protects paint. b) Long Term Outdoor: WeathersheildTM HD- primarily for intense sun environments and long-term storage provides optimum protection from a multi-layer breathable (heavyweight) fabric. 2. Outdoor Weather Protection Ultratect Car Cover: This car cover doesn’t just keep your vehicle looking showroom new; this cutting-edge fabric retains its sharp looks longer than other materials. Each cover is stitched together using solution-dyed WeatherMax® SL fabrics, the most fade-resistant you can find. Every single thread is dyed from the inside out, not just on its surface. This advanced colouring process leaves your Ultratect car cover fully fade resistant. Along with retaining its colour longer, this cover also delivers superior outdoor protection against water and UV rays. It’s finished on both sides with HydroMax to repel rain and morning dew, yet still remains fully breathable for natural drying. And, this lightweight car cover blocks against even the harshest sun exposure. Never one-size-fits-all, they are custom tailored for a form fit on your vehicle. Plus, this tight cover holds its shape longer than most and won’t get baggy. You even get a solid 4-year warranty a) Indoor: Dustop TM- 4 layer cover with maximum dust protection, and its soft inner layer protects paint. b) Severe Rain Storms: EvolutionTM (TechnalonTM)- a heavyweight, four-layer fabric for extended outdoor use, but especially heavy rain protection. c) Inclement Weather: NoahTM by Kimberly ClarkTM — a three-layer fabric to provide more water resistance than most covers as well as UVR protection for extended outdoor use, but especially heavy rain protection. d) Severe sun exposure: Sunbrella™ by Glen Raven Mills, Inc In areas of high sun but little rain a Sunbrella™ cover provides the best UVR protection for prolonged sun exposure, a durable long-lasting fabric that protects interior and exterior finish, provides almost complete UV block, fade and water resistant. 3. Convertible Interior Care: Sunbrella™ by Clen Raven Mills, Inc. Easy to use protection for convertibles when the top is down, the interior cover protects the windshield and the vehicle interior from UV radiation, the suns heat, airborne pollutants, and droppings from trees and birds 4. Two-cover system: During high winds the use of this system will avoid paint surface marring from the cover being buffered by high force winds (Hurricanes) 1. Dustop TM- 4 layer cover with maximum dust protection, and its soft inner layer protects paint. 2. WeathersheildTM HD- primarily for intense sun environments and long-term storage provides optimum protection from a multi-layer breathable (heavyweight) fabric. Car Covers - Car Cover World: Complete Covercraft Range, Custom-Fit Covers, Ready-Fit Covers, Tonneau Covers, Front End Masks, Seat Savers, UV Heatshields Placing Cover on Vehicle: To place car cover on vehicle; start by placing the rolled-up cover on the centre of the roof (do not drag cover across vehicle surface as it may cause scratching) unroll from the middle to the rear of vehicle and then middle to front, unroll left side and then right using mirror `pockets' (if fitted) Ensure that cover is `tight' and attach cable and lock (if required) Remove from vehicle opposite to the above and store dry cover in storage bag (if supplied) Note- do not place cover on a dirty or wet paint surface Cleaning – Maintenace / Care Some fabrics offer more heat insulation than others, simply because they are multi-layered and are more effective at keeping heat away from the vehicle surface, but any cover will help reduce the vehicle temperature on a hot day. They are manufactured to be water-resistant, available in various breathable fabric materials for protection against every type of climatic conditions, as well as both long-term indoor or outdoor vehicle storage. •Use a soft Horse Hair brush and a vacuum to remove any loose dust or dirt •Gently rinse cover with clean water •Wash with a 5:1 clean water / Woolite solution, using a soft brush to loosen any stubborn dirt (Do not scrub surface (see Spots and Stains) •Thoroughly rinse with clean water to remove soap solution •Allow air-drying •Apply 303TM High Tech Fabric Guard by spraying from approximately 6-inch above the surface with a side-to-side motion, dampen but do not saturate. •Two applications will ensure complete coverage, allow air-drying between applications. •Allow cover to dry before storage. Maintenance About once per month, dependants upon usage / climate, rinse the cover with clean water by gently hosing to remove surface dust or dirt that may have settled. This will extend the time requirements for between soap and water cleaning / washing. Use a rolling tape type lint brush, designed to remove lint from clothing, on your car cover. Daily use will remove any lint or light dust and reduce cleaning time dramatically. Spots and Stains Spray the spot until wet with 303TM Cleaner & Spot RemoverTM, agitate with a medium-soft brush and let stand. Then blot up the stain and excess cleaner as described above. If necessary, repeat, agitate and let stand a few minutes before wiping clean. Dry completely before use Washing and Care: Covers should be taken to a commercial Laundromat and washed in large automatic washers without agitator. Use Woolite (no soap or detergent). Wash your cover using the "Normal" or "Permanent Press" cycles in cold or warm water. Do not wash in hot water. Notes: Put the cover through two rinse cycles - it is important that the entire cleaning solution be removed in order to preserve the cover's water resistance, and then air dry. Do not put the cover in an automatic heated dryer (the fabric can melt or shrink) Do not dry-clean covers as the chemicals used will negatively affect the fabric protection abilities and durability Information Resource: Car Cover World (http://www.carcoverworld.com) Sunbrella™ (http://www.sunbrella.com/usa/) Information resource Car Cover World (http://www.carcoverworld.com) Sunbrella™ (http://www.sunbrella.com/usa/) Automotive Detailing Inside & Out; a Knowledge Base for the Perfectionist– by Jon Miller © TOGWT ™ Ltd Copyright 2002-2008, all rights reserved Detailing Articles This is one of is one of a series of unbiased and informative, knowledge based, subject specific articles, which are dedicated to the automotive detailing enthusiast or professional detailer in search of development and further education Copyright Protection and intellectual property rights-© This work is registered with the UK Copyright Service that supports international copyright protection by securing independent evidence that will help prove originality and ownership in any future claims or disputes. All original material is copyright, unless otherwise state (1) it may be copied and distributed for non-commercial purposes only provided that you retain all copyright and other proprietary notices contained in the original material, (2) the information is copied in full with no changes unless prior written agreement is obtained from TOGWT, and a reference to © TOGWT ™ is included, any unauthorized use of these materials may violate copyrights and/or trademark. Be aware these files have been digitally watermarked and actually contain embedded copyright information; so they can be traced to any website on the internet if needed in a legal confrontation
this may sound like a dumb question, but do you recommend using a car cover on a dirty car. in the past i have always used the car cover only on a clean vehicle.
Placing Cover on Vehicle: Do not place a car cover on a dusty or dirty car (dry surface with a waffle weave towel or remove dust with a car duster) Ensure that the cover fits well and keep the cover clean (dust / dirt between the inside of the cover or the vehicle surface will cause scratching) Purchase a good quality cover that is manufactured from a durable fabric suitable for your local climatic conditions and expected usage. To place car cover on vehicle; start by placing the rolled-up cover on the centre of the roof (do not drag cover across vehicle surface as it may cause scratching) unroll from the middle to the rear of vehicle and then middle to front, unroll left side and then right using mirror `pockets' (if fitted) Ensure that cover is `tight' and attach cable and lock (if required) Remove from vehicle opposite to the above and store dry cover in storage bag (if supplied) Ensure that cover is `tight' and attach cable and lock (if required) Remove from vehicle opposite to the above and store dry cover in storage bag (if supplied) How did I miss that important point? THANKS
When spraying the 303 HT Fabric Guard on it, obviously your gonna be spraying it on the cover, while cover is on the car?
