911 Targa S...

Discussion in 'Professional Detailer's Studio' started by Clark, May 21, 2009.

  1. Clark

    Clark Two Bucket System Washer

    Good Evening all :)


    Another Porsche with sticky paint :lol:

    [​IMG]


    I last saw this car almost exactly a year ago to the day where it received a wax top up after a correction detail around 18 months ago and this time it was in for a few days to tidy up the paintwork etc.

    Got to love Ceramic brakes, they should be standard on all cars - they just don’t give off any brake dust at all!

    [​IMG]


    As always, pre-foam was first - using hyperwash through the lance @ 50 degrees:

    [​IMG]


    Then rinsed off at high pressure.


    I was pleasantly surprised to see that the coat of Vintage applied 12 months ago was still there, even more surprising as the car is driven regularly and has had trips to Germany and back. The owner had clearly been maintaining the finish extremely well (not using too much shampoo or overly hot water etc)...

    [​IMG]

    [​IMG]


    Say what you like when it comes to the looks of high-end waxes versus lower end ones but try getting durability like that from a £40 wax!



    The wheels were pretty clean already but I still gave them a going over with Gloss-It wheel gel (4:1) to make sure they were 100% clean:

    [​IMG]

    [​IMG]


    There were just a few tar spots remaining which were removed with Tardis later on in the wash stage:

    [​IMG]


    My camera batteries were then put on charge so no more pictures until the correction stage but the car was washed in the usual manner as most of my other details :)



    Defect wise, the paint was in very good condition with little in the way of swirling but the odd random scuff and scratch picked up over the last year or so:

    [​IMG]

    [​IMG]



    Due to the sticky paint I went straight for Gloss-It One Step Machine Polish with a drop of EVP Pad Prime and a Gloss-It Light Cut Pad:

    [​IMG]


    This breaks down perfectly on sticky clears...

    [​IMG]



    Leaves a nice finish too, this is after a Top Inspection wipe down:

    [​IMG]

    [​IMG]

    [​IMG]



    The black plastic panels on the roof edges are stupidly soft so are easily marked:

    [​IMG]


    Due to the fragile abrasives contained, I used Menzerna FPII with a Menzerna Polishing Pad to correct these:

    [​IMG]


    Then back to Gloss-It for the pillars:

    [​IMG]



    For the bumpers, I used a Menz 80mm Polishing Pad and Menz 203S:

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]




    Unfortunately the car had picked up a nasty ding in the rear 1/4:

    [​IMG]


    I didn’t think it would come out but Martin at Dent Devils happily proved me wrong, managing to get 99% of it out - top man! :thumb:

    [​IMG]



    Once polishing was complete, the duster was used to remove any light dust:

    [​IMG]


    Vintage was then applied by applicator pad and buffed off approx 15 mins later:

    [​IMG]



    Wheels were sealed with Blackfire Metal Sealant:

    [​IMG]


    Tyres were dressed with Gloss-It and the exterior trims were done with Gloss-It TRV.

    Tailpipes were polished with Brilliant Metal Polish:

    [​IMG]



    The interior was also fully detailed and the exterior glass was treated with the new Werkstat Glass Sealant System soon to be released :thumb:



    Wekstat Carnauba Glos was used for the final wipe down and here are the final pics of what is one of the best looking 911's I have the pleasure of looking after :)



    [​IMG]

    [​IMG]


    Engine before:

    [​IMG]

    [​IMG]

    After:

    [​IMG]

    [​IMG]

    [​IMG]


    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]




    And here are a few of this rather nice GT3 done last week, corrected with Gloss-It Extreme Cut and Evolution Polish, finished with Vintage...



    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]



    Thanks for looking :)


    Clark
     
  2. 911Fanatic

    911Fanatic DB Pro Supporter

    You're awesome.
     
  3. JM604

    JM604 Any Rag Vehicle Washer

    That's one shiny car!

    What color paint is that exactly? I like how it seems to change color in different lighting..
     
  4. forcefedm3

    forcefedm3 Any Rag Vehicle Washer

    omg that looks amazing! what did you use to clean the carbon fiber engine cover?
     
  5. Clark

    Clark Two Bucket System Washer

    :p

    I think it's Midnight Blue mate :)

    R222 for the engine bay, then aerospace 303. Carbon was done with Werkstat Prime Strong :)
     
  6. richy

    richy Guest

    Both those cars look fantastic!! i don't think I have seen a 911 with the strip around the windows before...looks good!!
     
  7. Buddy

    Buddy Getting to know Detailing

    Thats is amazing work. It looks just beautiful...Way to go...:thumb:
     
  8. Pats300zx

    Pats300zx Official DB Moderator

    Amazing work Clark....
     
  9. J BELL

    J BELL Nuba Guru

    Amazing as always sir!
     
  10. Hostage1978

    Hostage1978 Guest

    Always love your posts, thanks again
     
  11. supercharged

    supercharged DB Forum Supporter

    Werkstat Glass Sealant System, huh? That sounds very promising! Please report on durability and ease of use...
    By the way, awesome work, Clark! And Beautiful color!!! That's a lot of hard work!
     
  12. slanguage

    slanguage OD On Detailing

    Lookin Good!
     
  13. Denzil

    Denzil Guest

    That's some stunning work there Clark!
     
  14. Nica

    Nica Banned

    Well done there Clark :applause: always enjoy your details. Looks like it's time for me to get in touch with Rich, there are a few items I don't have in my collection ;)

    Speaking of items, I've been wanting to try Brilliant Metal Polish. I've read great things about this metal polish but never really tried it for my self...perhaps it's time to order it :thumb:
     
  15. ampbmw

    ampbmw DB Forum Supporter

    I know Porsche paint is of the highest quality, but I just can't help but say you make paint look better than anyone else I've seen on here or Detailing World. Just drooling...
     
  16. detaildoc

    detaildoc Guest

    Beautiful finish. That Gloss it tire dressing looks good.
     
  17. P1et

    P1et Official DB Moderator

    Top work, always a pleasure to see these. Cleanest working bay to boot!
     
  18. Dale

    Dale Any Rag Vehicle Washer

    Very nice! :mounty:
     
  19. Wolfs Chemicals

    Wolfs Chemicals DB Certified Manufacturer

    Nothing less than the best from you, mate! Send my regards to Rich and the rest!
     
  20. Carn

    Carn Welcome to Detailing

    Lovely work as expected. Well done indeed :thumb:

    Regarding the Gloss-It range of polishes, is this your current go to option for anything with 'sticky' paint Clark ?
     

Share This Page