2013 Asphalt Scion FRS CQuartz FINEST

Discussion in 'Show and Shine' started by TWISTEDFRAME, Mar 13, 2013.

  1. TWISTEDFRAME

    TWISTEDFRAME Jedi Nuba

    Hi everyone! We were lucky enough to have another Scion FRS come through the shop today. This one is a 2013 in Asphalt that was booked for a New Car Correction and Cquartz FINEST. This customer drove a couple hours to get to us, so we didn't take too many before pictures so he didn't have to sit around waiting for too long.

    We started with the wheels, tires, and wells. The wheels were just cleaned with the car wash soap since they weren't in bad shape at all. The tires and wells were cleaned with Blackfire APC. The wheels were coated with FINEST, the tires dressed with CarPro PERL, and the wells dressed with Meguiars Hyperdressing.

    We started the wash by foaming the exterior of the vehicle with Meguiars Hyperwash.

    [​IMG]

    The foam was left to dwell for about 5 minutes and then it was pressure washed off. While it was dwelling we used a soft brush to agitate the emblems, trim, and body seams to make sure all of the dirt and grime was removed.

    [​IMG]

    This was followed by a traditional 2 bucket wash, and then the vehicle was dried with some waffle weave drying towels.

    The paint was in pretty good shape, but it did need a little bit of work before being coated. Unfortunately the swirls could not be captured on camera, one because the color did a great job hiding them, and two because the sun decided to hide for the first couple hours of this job.

    Anyway, we ended up correcting the paint with Menzerna 106fa on a light blue LC Hybrid pad with the Rupes 21LHR. Here is how it looked in the sun after being corrected.

    [​IMG]

    [​IMG]

    [​IMG]

    After the correction we used CarPro Eraser to wipe down the glass, trim, wheels, and paint to prepare the surface to be coated with Cquartz FINEST. It is very important to have a squeaky clean surface to apply the FINEST to.

    Here is how the car turned out after having all exterior surfaces (minus the tires) coated with Cquartz FINEST. Notice how wet and glossy the paint looks. FINEST really is the best looking coating we have ever seen or used.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Here are a couple more where I was just playing with a new wide angle lens while the customer was on his way back

    [​IMG]

    [​IMG]

    We were very happy with the way this car turned out, as was the customer. Now this car is protected and looking it's best for it's new life. Thanks for checking out our write up, and we appreciate your feedback!
     
  2. J BELL

    J BELL Nuba Guru

    Looks great, that flake is unreal.
     
  3. cnut

    cnut DB Forum Supporter

    Nice work as usual!
     
  4. Pureshine

    Pureshine DB Pro Supporter

    Nice job :) .
     
  5. 911Fanatic

    911Fanatic DB Pro Supporter

    Very nice David!
     

Share This Page