2010 Audi A4 Sline New Car Prep and 3M PPF Install

Discussion in 'Professional Detailer's Studio' started by detailersdomain, Oct 27, 2009.

  1. detailersdomain

    detailersdomain Administrator

    Here is a 2010 Audi A4 Sline, the customer requested the dealer not to prep the car. The dealer only took off the white film and packaging from Audi. We had a great surface to work with all that was required was to degrease some of the spots from the normal driving, a good claying, 1 step polish with Menzerna PO85RD and finally Collinite Insulator Wax with Swissvax Divine to top it.

    As well as a new car prep the customer requested that we install a 3M PPF (custom cut) on his bumper, partial hood and fender, and mirrors.

    Enjoy.

    Products used:
    Exterior:
    Lusso AutoBathe
    Uber Yellow Wash Sponge
    Swissvax Yellow Clay Bar and Optimum Instant Detail Spray and Gloss Enhancer
    Einszett Spray Wax
    P21S Finish Restorer Metal Polish (on the tips)
    Menzerna PO85RD
    Collinite Insulator Wax
    Swissvax Divine

    Wheels and tires:
    P21S Wheel Cleaner Gel
    Swissvax Wheel Brush
    Uber Wheel Brush
    Uber Spoke Brush
    Swissvax Pneu
    Swissvax Autobahn

    Tools:
    Infratech 5300
    Flex 3403
    Porter Cable X7424XP
    The Uber Foam Pads (5.5inch)
    Tons of "Uber" Microfiber Towels
    Uber Drying Towels

    Brushes
    Cam Spray Pressure Wash and Cam Spray Foam Canon

    Before shots:
    [​IMG]
    [​IMG]
    [​IMG]

    Wheels were cleaned up by using P21S Wheel Cleaner Gel, with Swissvax Wheel Brush, Uber Wheel Brush, and good old microfiber towels
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    P21S Total Autowash was used on the bug and tar and some spots as pictured above on the hood and mirrors.
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Lusso Auto Bath was used to wash the car.
    [​IMG]
    [​IMG]

    Car was rinsed and Wheels all cleaned up
    [​IMG]
    [​IMG]
    [​IMG]

    Clay bar after a couple passes
    [​IMG]

    Polishing with Menzerna PO85RD and the Uber Green Pad
    [​IMG]

    Rinse after polishing as we prep for the 3M PPF install
    [​IMG]

    Final Touches on the Wheels
    [​IMG]

    3M PPF Prep and Install
    [​IMG]
    [​IMG]
    [​IMG]

    Fitting to the hood
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Fender install - Film was lined up with the hood and then fitted and tacked down
    [​IMG]
    [​IMG]
    [​IMG]

    Bumper install
    [​IMG]
    [​IMG]

    Wax being applied with the PC 7424XP
    [​IMG]

    Nice even coat of wax
    [​IMG]

    Final shots of the car
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Customer and friend inspected film with Dan
    [​IMG]
     
  2. Chas

    Chas DB Forum Supporter

    Looks awesome Phil!
     
  3. trhland

    trhland Nuba Guru

    i second that!
     
  4. dsms

    dsms DB Forum Supporter

    First off didnt know you could machine apply the Colli, must do that when I get around to my winter prep.

    Second the Audi looks awesome and the film install looks dead on!
     
  5. slanguage

    slanguage OD On Detailing

    Very nice work guys!!!! :applause:

    Sexy car!
     
  6. detailersdomain

    detailersdomain Administrator

    thanks guys.

    Dave though I told you that the other day.... :)
     
  7. agpatel

    agpatel OD On Detailing

    Another great job by the DD crew, great car as well! :worship2:
     
  8. bentley147

    bentley147 Jedi Nuba

    the red one look potent ..insulator wax u can go wrong ...great job:applause2:
     
  9. kei169

    kei169 Wax on..Wax off

    Nice!!!
    Looks very sexy with the car!
     
  10. agpatel

    agpatel OD On Detailing

    Oh yeah, one questions, how is 845 under Divine compared to just Divine by itself on the bare paint, does it take away from the looks of the wax or is it a negligible change if any?
     
  11. Jedidiah

    Jedidiah Guest

    audi red is soooo sharp.

    nice job DD
     
  12. P1et

    P1et Official DB Moderator

    Very nice work boys!
     
  13. cnut

    cnut Guest

    Car looks great! One question: how long does it take you to clean each wheel? I always notice how clean the wheels are when you detail.
     
  14. Got Wax

    Got Wax Banned

    Looks great, Phil!!!! Glad to see you using teh 845. After talking with Envvious E about his use of Collinite, I've placed an order and waiting for its arrival!!!

    Andy
     
  15. UncleB

    UncleB Virgin Detailer

    Glad to hear of a request not to prep the car from the dealer :applause2: Folks here in TX just don't get it..... yet! Great job :applause2:
     
  16. pektel

    pektel DB Forum Supporter

    I've never seen Collinite 845 take away from the looks at all, from any paint I've used it on. Just my experience (almost 1 whole bottle).
     
  17. supercharged

    supercharged DB Forum Supporter

    Awesome work, Phil! Question, how long does that film lasts on a car? I understand that it depends on annual milage, just wanted to know the expectations...
     
  18. Pats300zx

    Pats300zx Official DB Moderator

    Fantastic work Phil....
     
  19. bryansbestwax

    bryansbestwax DB Forum Supporter

    nice job, the PPF looks good, I know first hand how hard that stuff is to put on perfectly. great job.
     

Share This Page