Today's detail is of a 2007 Dodge SRT8 SuperBee. SB this one is for you The SRT8 sports a 6.1 cubic inch Hemi with 425 hp and approximately 400 ft pounds of torque. The weather in the Northeast today was extremely hot and humid. I swear I lost about 5 pounds but luckily I stayed hydrated. The client requested an exterior detail only and my plan was to use 106FF as the paint was in very good condition. I was very worried that the heat and humidity would make 106ff difficult to work with. I had 1Z polishes standing in the wings if 106FF acted up. Thankfully it performed flawlessly. The client requested an exterior only but I did the interior for him as well. The car was in very good shape but the inner wheel barrels had a ton of accumulated brake dust on them and the Brembo brake calipers. I spent 1.5 hours alone on the wheels and had to change my wash bucket 3 times...:angry. In the end them came out very nice. Hopefully the Zaino Z2 that I put on the wheels will cut down on the amount of dust. I also polished the headlights with 106FF and a 4 inch pad. Total Time: 7 hours Process: Presoak via Foam Cannon and DG 901 and CG CWG (5 mins) Presoak lower rocker panels with P21S TAW Wash with 2 BM and Duragloss 901 soap Clay with Meguiars Clay Polish via Makita 9227 with 3M BP and Sonus White pad with 106ff Polish via Flex with Sonus White Pad Polish with 4 inch LC CCS pad Wheels cleaned with Eagle One Tire and Wheel Cleaner and every wheel brush in my arsenal Inner wells cleaned with Poorboys Spray and Rinse LSP=Zainio Z2 ZFX'd x2 including wheels and glass Tires dressed with Meguiars Hot Shine Glass cleaned with Zep Glass Cleaner
Very nice detail. :headbang: Thanks for sharing it with us. :applause: The wheels and calipers look great. :worship2: I am sure the customer was happy with the job especially with the interior bonus.:hug: Dave
i have a client that has a car that looks excatly like that,except hers doesn't look that nice!!! hey what are the wheels made of and can Wheel brightener be used on them?
The wheels are chromed. I am pretty sure you can use WB on them. I wish I had some to use on the inner wells
Nice work Pat! I think I like Supe's color better, hehe. Oh and I must have spent 2 hours on my sister's 328i's wheels today and they still weren't perfect!!! I tried P21S Gel, Meg's WB, and APC, Brakleen and the brake dust was still baked on there pretty good. :wall:
Question, the flat black areas of the car did you polish those areas? BTW this is one of my all time favorite cars and I love the color. Nice work! :thumb:
No all of the black areas were taped off. I did go over them with some 303 to give them some UV protection.
