Red Moose Glaze - Application Question

I may be using this tomorrow if I can get some solid info:

What I need to know is:

Can I put it on top of a sealant and under a nuba?
What speed? (both DA and rotary) I will be using blue sonus pad
General application guidlines...

Thanks!

 

PM sent

 

Wow, how weird, I'm using RMG for the first time tomorrow also. Can I also get some info on application method?

 

Sure, i was just letting him know that I have a full bottle if he needed it, wasnt trying to hide anything, sorry about that

 

I've tried it using my UDM and a gray pad and it was only ok. I then tried applying it with a foam pad and removing it with UDM and gray pad and it did a better job. That was my experience.

 

I've used this quite a bit last summer, I like it...but I only applied it by one of those yellow foam applicators and by hand of course. Oh I've only toped it off with Carnauba, never with a sealant but if I'm not mistaken I think this is one of the products that can be toped up with a wax or a sealant...hmmm..or am I confusing it with the CG Glaze?

I'll have to double check but I perosonaly have only used it wth wax on top

Hope this helps..a little.

 

i mean technically its GLaze,,, so i would assume that you can apply it by hand like Nica mentioned or gray pad and top it off with sealant or wax..

 

I used RMG with a pc on speed 2,and only under CMW so far.
I believe RMG can only be used under carnuba waxes not sealants b/c of the oils in it.

 

RMG is a RED Machine glaze..and its used under a WAX and thats all..use with a black LC pad on 2 speed on a Flex...2-3 on a PC...just work it in at a moderate back and forth motion...like you are applying a wax...when you see it starting to dry stop and buff off....

Vanilla Moose is a hand type glaze..but can be used with a machine at a slower speed....it cleans also...

AL

 

Cut and paste from Autopia