1. golfer1659

    golfer1659 Virgin Detailer

    Is the MTM Hydro Lance 1/4 threaded and 1/4 male piece?


    I know the male piece is a 1/4 but I am seeing if the threaded side is a 1/4, any help is appreciated.
     
  2. golfer1659

    golfer1659 Virgin Detailer

    updated the question
     
  3. boredstudent3

    boredstudent3 Wax on..Wax off

    [​IMG]

    [​IMG]

    does that help? in the first pic, don't look at the contents of the bag, i use it for storage. but the bag is for the proper connector shown in the second pic.

    the connector is threaded on both ends, and connected as shown. 1 end goes into the pressure washer adapter, and the other end goes into the lance head.
     
  4. Pureshine

    Pureshine DB Pro Supporter

    both should be the same.
     
  5. JoeyV

    JoeyV Welcome to Detailing

    Your bag says nipple. lol
     
  6. golfer1659

    golfer1659 Virgin Detailer

    I am talking about the piece my finger is pointing too (threaded side) lol. For some reason that male 1/4 is too long so I am getting one that matches the tips that came with the PW.
     

    Attached Files:

  7. golfer1659

    golfer1659 Virgin Detailer

    Here is a photo that shows the difference........

    [​IMG]
     
  8. golfer1659

    golfer1659 Virgin Detailer

    So since its declared a 1/4 inch can I find the male side tip that fits the same size as the piece from the power washer.
     
  9. boredstudent3

    boredstudent3 Wax on..Wax off

    i have that same piece also, it's stored in the bag in the first pic.

    it comes with the MTM by default and i took it off b/c i couldn't connect the PW to it.

    i needed to buy the 1/4" hex nipple so that the PW adapter (black plastic piece in second pic) could fit on the other end

    when i assemble it together, the threads do not go all the way in. there is some sticking out like the same in your pics, you can see the threaded portion with the teflon tape

    it's "niple hexagonal" for you, quebec'er...lol...:p:
     
  10. golfer1659

    golfer1659 Virgin Detailer

    See, I was hoping I could find a similar quick connect male piece like the one in the photo showing one of the Tips that came with the PW then thread it into the back of the MTM Hydro like it is now.
     

Share This Page