Pressure washer / Foam lance combo Q's?

I have the clean force and no you don't.

 

Well, you need the quick release fitting.

 

Which is already on the cleanforce right?

 

The actual quick release is on the clean-force, but you still need the fitting that goes into the foam cannon so it mates to the clean-force. It kind of looks like a fitting one would use for an air compressor attachment. You can find it at home depot for 2$

 

Does anyone have a link to this part??

 

I have both the MTM foam cannon and the Clean-force PW. The MTM FC I received came with the quick connect connector and a screw on connector, however the quick connect connector would not fit on my quick connect on the PW lance. After looking at the PW and FC I found that you can unscrew the PW lance extension and screw on the other included MTM connector. I use my MTM FC this way because it seems more balanced compared to how long it would be with the PW gun, lance extension and then the FC.

So for me screwing the FC onto the PW gun is a better solution although I lose the quick connect and disconnect feature.

 

You might have a older model then me because my other piece that came with the MTM does not fit after you take off the lance extension........still waiting to hear from Joey V

 

It's possible however I have only had mine about 6 months.

I am talking about the screw on connector like in this picture.

http://www.chemicalguys.com/MTM_NEXT_GENERATION_PROFESSIONAL_FOAM_CANNON_FOA_p/eqp_300.htm

 

Yea no it doesnt screw in, the lip of the screw on piece is too thick............im just gonna wait to see what Joey V knows about the quick connector that will screw into the foam canon.

 

http://www.kmart.com/universal-by-apache-1-4-34-plug-x-1-4-34-mpt-adapter/p-07141732000P


I think I need a new piece like that, but I think the side that screws into the MTM hydro is 3/8's?? so the male quick release is 1/4 and the screw in is 3/8??

 

Mine hooked up right to it didn't need any type of adapter...