Post Your Beading Pics

Discussion in 'Last Steps: Waxes, Sealants, and Coatings' started by 02blackout, Apr 9, 2010.

  1. Gekko

    Gekko Any Rag Vehicle Washer

    Collinite 845 after a few months . . .

    [​IMG]
     
  2. Kilo6_one

    Kilo6_one DB Forum Supporter

    is that from under the moonroof? Love the pics............
     
  3. hamza7

    hamza7 Welcome to Detailing

    It's only 3 days... but it's looks pretty good as well
     
  4. Jumbo Jet

    Jumbo Jet Jedi Nuba

    Multiple layers of Z2/Z5, topped with a few layers of 845

    [​IMG]
     
  5. Buff and Beyond

    Buff and Beyond DB Pro Supporter

  6. Buff and Beyond

    Buff and Beyond DB Pro Supporter

    ^ first is power lock, second is SV Opaque
     
  7. SRT8Spartan

    SRT8Spartan DB Forum Supporter

    was a while back and had been on for months
    [​IMG]

    bug friend.
    [​IMG]
     
  8. Red Orc

    Red Orc Birth of a Detailer

    Jeffs Werkstat Prime Strong Meguiars Ultimate Paste Wax Jeffs Werkstat Crylic Jet Trigger

    2012-03-18 09.37.16.jpg
     

    Attached Files:

  9. hamza7

    hamza7 Welcome to Detailing

    How much durability are you seeing with Prime, Prime Strong?
     
  10. EbbeJ

    EbbeJ Jedi Nuba

    1 layer of Swissvax Shield after more than 5 months in salt, snow and lots of grime...


    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  11. BrShootr

    BrShootr Virgin Detailer

    Are there any concerns when washing the car to keep the sealant beading like that for extended periods? Other than no clay bar, of course.
     
  12. Red Orc

    Red Orc Birth of a Detailer

    I put the Meguiars Ultimate Paste Wax on a week or two after I applied the Prime Strong so I couldn't really comment.
     
  13. EbbeJ

    EbbeJ Jedi Nuba

    I don't know if it's me you're asking, but just wash the car with a good pH-neutral shampoo and a gentle wash-media(I mainly use a Zymöl sponge), and you should be okay. A good prewash is also recommended, but just be sure that it's made for the job and doesn't strip the wax or sealant.

    The Swissvax Shield is labelled as a wax, but IMO the wax part is gone after a month or so, and after that it sheets more than it beads.


    Kind regards,

    Ebbe
     
  14. Chaseme

    Chaseme DB Forum Supporter

    Aquarts Nano at 5 months of winter abuse.

    [​IMG]
     
  15. Kilo6_one

    Kilo6_one DB Forum Supporter

    BFWD/BFMS on my sierra...... 2 weeks since application. Thus far this is my favorite combo........

    Fender, beading nice
    [​IMG]

    hood
    [​IMG]

    door
    [​IMG]
     
  16. Red Orc

    Red Orc Birth of a Detailer

    [​IMG][​IMG]
    [​IMG][​IMG]
    [​IMG]




    Zaino AIO 2 coats of ZFX'd Z-2 & Z-5 mixture 3 coats of Z-8 3 coats of Wekstat Acrylic Jet Trigger
     

    Attached Files:

  17. MartinD

    MartinD DB Certified Manufacturer

    What LSP? ^

    Kilo - awesome shots!
     
  18. Kilo6_one

    Kilo6_one DB Forum Supporter

    blackfire wet diamond sealant, topped with1 coat of blackfire midnight sun. Ive been getting about 5 months solid out of this combo, its garaged but driven daily, and sometimes Ill park it overnight outside, so im pretty happy with the combo, plus the flake really pops with it.

    I think my neighbors think im a weirdo....... taking pictures of a wet car, spraying it off again, then taking more pictures.
     
  19. ModdedMach

    ModdedMach Birth of a Detailer

    My main lsp is going to be Jetseal109 topped with Pete's 53, but this picture was after i polished with 105/205, then with BFWD and believe it or not topped with Megs NXT otc polymer paste wax

    [​IMG]
    Beading by ModdedMach, on Flickr
     
  20. ampbmw

    ampbmw DB Forum Supporter

     

Share This Page